voltas airconditioner error code

R410.vs.Gas.R32

(1)>  E0. /  EH00! Indoor unit eeprom parameter error

(2)> E1. /   EH01! Indoor/outdoor unit communication error

(3)>E2. /    EH02! Zero-crossing signal detection error {only for INV 9K12K24K}

(4)>E3. /.   EH03 indoor fan speed has been out of control

(5)>E4. /.   EH60 Indoor room temperature sensor T1 open circuit or short circuit

(6)>E5. /.   EH61 Evaporator coil temperature sensor T2 open circuit or short circuit

(7)>E7. /.  EH06 indoor PCB Display board communication error

(8)>EC. /.   ELOC Refrigerant leakage detection 

(9)>F1. /.    EC53 outdoor ambient temperature sensor T4 open circuit or short circuit

(10)>F2. /.   EC52 condenser coil temperature sensor T3 open circuit or short circuit

(11)>F3.  /.   EC54 compressor discharge temperature sensor T5 open circuit or short circuit

(12)>F4.  /.  EC51. Outdoor unit EEPROM parameter error

(13)>F5. /.  EC07 outdoor fan speed has been out of control

(14)>P0.  /.  PC00. IMP malfunction or IGBT over-strong current protection

(15)>P1.  /.   PC01. Over voltage or over low voltage protection

(16)>P2.  /.   PC02.  High temperature protection of compressor top (only for 24k) 

(17)>P4.  /.   PC04. Inverter compressor drive error 

     Voltas inverter split airconditioner

     

New Features ICE WASH,Super Silent,Filter clean and Gas leak error

ICE Wash-

It is for The cleaning of Cooling coils.

How to Activate ICE wash?

Need to press the turbo cool button for 4 times on a remote... Then It displays 'SC' which means Ice wash mode gets activated.

Then Blower turns off...And Compressor runs at a Normal speed.... then it

freezes a frost layer on a cooling coil...and after some time it melts then drains out through the drain pipe.

This feature will be in a very selected models-

Vertis (Only in Emerald in a new lot), Verdant and Venus.

Not in a Prism & Platina

2. Super Silent Mode-

As Name suggests... It is to reduce the Noise level that AC produces while running.

How to Activate Super Silent Mode?

Need to press Temp button for 4 times.... then It displays 'SI'. Means super Silent Mode gets activated.

When AC runs on a Super Silent Mode that time compressor and Blower also work on a minimum speed.

3. Filter Clean Indicator-

This indicator will indicate to clean the dust filter...after 600 hours of AC usage.

it indicates in the initial 15 seconds when AC turns on.

When Dust filter gets cleaned then it is required to turn off the AC clean filter Indicator.

To turn off Indicator-

Need to press Sleep Button for four times...then AC will display 'CL' on IDU...then Indicator will be turned off.

4. Low Gas Leakage Detection-

This feature will be in only Fixed speed AC...and It will show the error of 'EC' incase of low gas or Gas leakage time.

           

Airconditioner ice wash 

Voltas inverter split airconditioner AC Checking process

*AC Checking process*

1# Voltage /Ampere / Grill Temperature 

2# Installation site picture 

3# Service 

4# Part Check (Resistance/Pcb voltage)

5# Gas Pressure (Back/Standing)

*Test mode* # Indoor pcb on off switch press for 5 second 

*Full load* # Cool mode+16°c+fan high+Lamp button press 8 time within 10 second.

*Half load* # Cool mode+17°c+fan high+Lamp button press 8 time within 10 second.

*Parameter testing mode* # Start the unit after compressor run 10 to 15 minute, press the Sleep button 8 time within 10 second.

*Hidden Error Checking*# Press wifi/Adj button 8 time within 10 second.

*Outdoor pcb led light blinking count*# Error code match via sticker pasted on pcb cover

Voltas inverter split airconditioner 

Voltas inverter split airconditioner error code

    ODU. LIGHT.    IDU. DISPLAY.

(1)>16.time.        P4! DC voltage over-high voltage protection

(2)>17.time.        P5! IPM Over-high temperature, protection

(3)>18.time         P6! Discharge temperature overheat protection

(4)>19.time.        P7! Cooling indoor coil anyi - freezing protection

(5)>20.time.         P8! cooling outdoor coil overheat protection

(6)>21.time.         P9! Heating indoor coil overheat protection

(7)>22.time.         PC! Cooling outdoor ambient temperature over-high protection

(8)>23.time.        PH! Heating outdoor ambient temperature over-high protection

  

 Voltas Inverter split airconditioner ka error code voltas